EnoSense® 3PH Current Sense - Current sensor
Acquisition of currents in three-phase systems for monitoring and analysis applications. The EnoSense® 3PH Current Sense enables the continuous acquisition of current values in three-phase installations. The measurement is carried out without interfering with existing systems and is particularly suitable for retrofitting in existing installations. The acquired data forms the basis for energy monitoring, load analysis and condition-based evaluation.
The EnoSense® 3PH Current Sense continuously provides precise measured values from the 3 current sensors.
Current (3-phase)
Why measure electricity in the building?
Energy consumption is decentralized – but transparency is often lacking at the level of individual circuits or systems.
With the EnoSense® 3PH Current Sense you create the basis for:
- Load transparency at consumer level
- Identification of peak loads
- Analysis of operating states and runtimes
- Optimization of energy use and costs
Technical concept
The sensor records the currents of all three phases via external current transformers (clip-on principle).
The installation is carried out without interrupting the conductors and without interfering with the existing infrastructure.
- Measurement of 3 phases simultaneously
- Non-invasive measuring principle
- Fast installation in existing buildings
- Wireless data transmission
- Low-maintenance solution
Typical applications
The 3PH Current Sense is specially designed for use in existing and new buildings:
Sub-distribution boards
Detection of individual outlets without additional measuring hardware in the control cabinet
HVAC and building technology
Analysis of ventilation systems, pumps, cooling and heating systems
Machines and systems
Detection of operating states (on/off), load profiles and usage
Energy and load management
Identification of peak loads and atypical consumption patterns
Retrofit projects
Retrofitting without interfering with the existing cabling
Advantages at a glance
- No bus cabling required
- Ideal for retrofitting
- Fast installation without system downtime
- Scalable for large buildings and systems
- Seamless integration into IoT systems
System integration
The recorded current values are transmitted via EnOcean® radio and can be integrated directly into existing systems.
Integration possible via:
- EnOcean® gateways
- MQTT / IoT platforms
- Cloud or edge systems
- Existing DEUTA Controls infrastructure (e.g. EnoDisc®)
This makes the sensor suitable for both stand-alone solutions and scalable IoT architectures.
Feature: "Startup" batteries (optional)
Two optional AAA batteries extend the measuring range down to 0 A.
The EnoSense® 3PH Current Sense supplements existing energy monitoring systems with a flexible, wireless measuring solution at consumer level – especially where conventional measuring systems reach their installation limits.
Schnittstelle Funk / Wireless interface / Interface radio | EnOcean EU: 868,3 MHz |
Weitere Schnittstellen / Other interfaces / Autres interfaces | Servicetaster / Service button / Bouton de service |
Sensorik / Sensors / Capteurs | Stromwandler, aufklappbare Stromwandler, je nach Typ 80 / 200 / 600 A Current transformers, hinged current transformers, 80 / 200 / 600 A depending on the type Transformateurs de courant, transformateurs de courant à ouverture, selon le modèle : 80 / 200 / 600 A |
Spannungsversorgung / Power supply / Alimentation électrique | Energy Harvesting mittels der aufklappbaren Stromwandler / Energy harvesting via split-core current transformers / Transformateur de courant ouvrant |
Umgebungsbedingungen / Environmental conditions / Conditions environnementales | Betriebstemperatur / Operating temp. / Température d'utilisation: -5 °C .. +50 °C Lagertemperatur / Storage temp. / Température de stockage: -15 °C .. +60 °C Luftfeuchtigkeit / rel. humidity / Humidité de l'air: 0 .. 80 % (nicht kondensierend / non condens. / sans condensation) Schutzklasse / Protection class / Classe de protection: IP20 |
Abmessungen und Gewicht / Dimensions and weight / Dimensions et poids | Länge x Breite x Höhe / Length x width x height / Longueur x largeur: 70 x 55 x 19 mm Hewicht / Weight / Poids: 80 g (Sensor only) |
Zubehör / Accesories / Accessoires | Aufklappbare Stromwandler (3x), im Lieferumfang enthalten Split-core CT-Clamps (3x), included Transformateur de courant ouvrant (3x), Contenu de la livraison |
DolphinView / Softwaretool EnOcean GmbH Sie gelangen auf die Seite des Herstellers und müssen sich dort für den Download registrieren. Note: You will be taken to the manufacturer's website where you must register for the download.
Hinweis:
Vorschau Preview | Datei File |
|
|
The following devices / options are currently available from us:
Bestellnummer Order number | Artikelbezeichnung Article name | Zulassung Approval |
12943 | AL-448-31-868 EnOcean sensor "EnoSense® 3PH Current Sense 80 A" / CE (868 MHz) | CE |
12965 | AL-448-32-868 EnOcean sensor "EnoSense® 3PH Current Sense 200 A" / CE (868 MHz) | CE |
12966 | AL-448-33-868 EnOcean sensor "EnoSense® 3PH Current Sense 600 A" / CE (868 MHz) | CE |