Services · Practice
Use Cases
Six common tasks in buildings and the devices we use to solve them. What they all have in common is that they don’t require wiring to the sensor: This significantly reduces the effort required in existing buildings.
What Our Customers Measure
9 Use Cases
Reference · UniversityRadon Monitoring via the Campus Wi-Fi Network70 areas in 14 buildings at the University of La Laguna in Tenerife: 140 sensors, a four-week rollout, not a single meter of new wiring.EnoSense® RADON, EnoSense® CO2Read the case study →
Interactive · ExampleOne floor, fully stocked45 × 20 m, 15 meeting rooms, 50 workstations: Select a configuration level, tap a device, and adjust the daily schedule. The result is a bill of materials with order numbers. 12 device types, up to 121 devices per floorOpen floor →
Interactive · 3DThe Same Floor in 3DRotate the floor, switch between configuration levels, click on a device: see at what height it’s mounted, why it’s there—and the receivers’ 12-meter range visualized as an area rather than a number.121 devices, six mounting heights from 0.72 to 2.75 mView in 3D →
AreaWorkstation occupancyWhich desks are actually occupied? Desk sensors report occupancy in real time; they’re adhesive-mounted rather than wired. EnoSense® Desk, Wall + Desk, Desk VIBRead the use case →
RoomsRoom Capacity and Number of PeopleHow many people are in a room at any given time during the day? This information is used to determine booking patterns, changes in room use, and hygiene requirements. EnoSense® People Counter, Presence CountRead the use case →
AirAir Quality and CO2CO2, temperature, and humidity every five minutes. Can be retrofitted without wiring, even in rooms without windows. EnoSense® CO2, EnoPuck® CO2, PM VOCRead the use case →
Occupational SafetyMonitoring Radon ExposureContinuous measurement of radon concentrations in workplaces, such as basements, underground parking garages, and workshop areas.EnoSense® RADONView sensor →
Building EnvelopeDetecting Open WindowsOpen windows waste heating energy. The window contact reports airing and individual room control turns the heating down – without cables.EnoSense® Window, individual room controlRead the use case →
Facility ManagementCleaning on DemandClean only what was used: motion detectors, desk sensors and people counters feed the cleaning schedule.EnoSense® PIR Ceiling, Desk, People CounterRead the use case →
School and OfficeVentilate by CO2A stand-alone CO2 traffic light or a display in the room with data for building automation.EnoPuck® CO2, EnoSense® CO2, EnoSign®Read the use case →
EnergyRetrofit Energy MonitoringMeasure current per system on three phases: clamp-on transformers, no cutting of conductors.EnoSense® 3PH Current SenseRead the use case →
LightingLighting by Presence and DaylightDALI control with wireless sensors taught in directly: no gateway, no cable to the sensor.BL-201/204/205, PIR Ceiling, LUXRead the use case →
Can't find your case here?
Just tell us the measurement, and we'll take care of the restMost projects consist of the same components: a sensor, a wireless receiver, a gateway, and an interface to your system. Tell us what you need, and we'll recommend the right devices.