CO2 Traffic Light EnoPuck® CO2 WALL
EnoPuck CO2 WALL: The CO2 traffic light "EnoPuck CO2" has been supplemented with a mounting ring for the wall and the appropriate holders on the device, especially for pre-wall installation.
Technical data
| Order Number | 12433 |
| Item Number | AL-602-02-868 |
| Device Profile (EEP) | A5-09-04, A5-07-01 |
| Measurement range | CO2: 0–2,550 ppm (other values available upon request) Temperature: 0°C–50°C Humidity: 0–95% rel. hum. |
| Power Supply | External 12 V DC power supply / External power supply 12 V DC |
| Certifications | CE, FCC, NCC, KC |
| Origin | Developed and manufactured in Germany |
| Wireless Interface | EnOcean EU: 868.3 MHz FCC: 902 MHz ARIB: 928 MHz NCC: 921 MHz |
| Additional Interfaces | RGB LEDs, individually dimmable , service button |
| Sensors | CO2 Motion Detector Relative Humidity Temperature Vibration |
| Environmental Conditions | Operating temperature: 0 °C to +50 °C Storage temperature: -20 °C to +70 °C Humidity: 0 to 99% (non-condensing) Protection class: IP20 |
| Dimensions and Weight | Diameter: 100 mm Height: 28 mm Weight: 100 g |
| Accessories | , wall-mount bracket included |
Description
EnoPuck CO2 WALL: The CO2 traffic light "EnoPuck CO2" has been supplemented with a mounting ring for the wall and the appropriate holders on the device, especially for pre-wall installation. In addition, power is supplied via a twin-strand cable that exits the back of the device, rather than through the side jack. This allows you to mount the EnoPuck CO2 WALL on a flush-mounted box and place the corresponding power supply inside it (not included).
The device is supplied with the appropriate flush-mounted power supply unit.
Unlike many other solutions, the bright RGB LEDs make the light signal clearly visible at all times, even from a greater distance.
The CO2 measured value is measured and displayed in the individual solution in the form of a traffic light (green/yellow/red), whereby the limit values can be configured using the BL-PC-FLEX-2 software.
The integrated motion detector also enables the LEDs to be switched off when no one is in the room.
The EnoPuck® CO2 WALL delivers the following measured values via EnOcean telegram at configurable intervals:
PIR Motion Detector, Range: approx. 2.5 m, , Detection Angle: approx. 120°
Variants and Order Numbers
4 versions| Order No. | Item Number | Radio Frequency | Design | Approval | Market | Bookmark |
|---|---|---|---|---|---|---|
| 12433 | AL-602-02-868 | 868.3 MHz | — | CE | Europe | |
| 12564 | AL-602-02-902 | 902 MHz | — | FCC | The United States and Canada | |
| 12672 | AL-602-04-921 | 921 MHz | — | NCC | Taiwan | |
| 12679 | AL-602-04-921 | 921 MHz | — | KC | South Korea |
CE/RED applies to all devices. Additional radio approvals depend on the model: Please select the part number for your target market. Other frequencies are available upon request.
Documents
Everything you need to know about EnoPuck® CO2 WALL for bidding and planning—no registration required.
Related items from the planning phase
4 postsSimilar Products
Same function, different design or power supply
Carbon DioxideEnoPuck® CO2The “EnoPuck CO2” CO2 indicator can be used both as a standalone solution and in combination with …
Carbon DioxideEnoSense® CO2Our new CO2 sensor operates self-powered via the integrated … when there is sufficient light intensity.
Carbon Dioxide and SoundEnoPuck® CO2 NOISEIn addition to the features of the AL-602-01-868 EnoPuck CO2 traffic light, the EnoPuck CO2 NOISE offers …
RadonEnoSense® RADONThe EnoSense® RADON, featuring measurement technology from the global market leader Ecosense, is a professional radon sensor for …Every sensor requires a receiver and a gateway: EnoDisc® and VL-700 BASE. Here’s how the system works together.