A floor,
121 sensors,
in 3D
Rotate the floor plan, cycle through the three configuration levels, and click on a device. You’ll see at what height it’s mounted, why it’s mounted there , and how far a wireless receiver’s signal reaches—the two questions that can’t be answered from a table.
The Floor That Turns
121 pieces of equipment · 45 × 20 mYour browser does not support 3D graphics. This same floor is available as a floor plan: sample floor in 2D →
Dragging rotates the view; the plus and minus buttons zoom—the mouse wheel and two-finger gestures also work. The room height of 2.75 m is an assumption for an office floor; all mounting heights are taken from the data sheets and the WELL guideline of 1.1 to 1.7 m for air sensors.
What the Three Dimensions Show
And why that doesn't fit into a tableThe installation height determines what a device measures. A CO2 sensor belongs in the breathing zone, a motion detector on the ceiling, and a table sensor under the tabletop. On a floor, these are three different levels — and that’s exactly what you can see in 3D in a second.
The range is an area, not a number. Turn on “12 m range”: the receivers’ circles are designed to overlap intentionally. If one fails, the measurement value still gets through. This overlap is the reason why we use conservative estimates.
The implementation levels are a budget, not a technical specification. Level 1 measures air quality and climate; Level 2 measures occupancy; Level 3 measures each workstation individually. Click through, and you’ll see what each level costs—in units, not in euros.
| Height | Devices | Level |
|---|---|---|
| 2.75 m | EnoDisc®, EnoSense® PIR Ceiling, EnoSense® Presence Count, EnoSense® PIR DOT | Ceiling |
| 1.60 m | VL-700 BASE, EnoPuck® CO2 | Wall |
| 1.50 m | EnoSense® CO2, EnoSense® Temp/RH, EnoSign® CO2/Temp/RH | Wall · WELL: 1.1 to 1.7 m |
| 1.20 m | EnoSense® Window | Wall |
| 0.75 m | EnoSense® LUX | Work surface |
| 0.72 m | EnoSense® Desk VIB | Work surface |
Six levels at on a single floor. The information about why a particular device is located exactly there is shown in the panel at when you click on it in the scene.
All installation locations and heights →Your Floor, Calculated
Send us the floor plan. You’ll receive a single invoice for your building: number of recipients, one gateway per floor, and a list of devices with order numbers.